XYZ 710 VMC
Carcateristici principale :
Standard :
3 axe CNC cu Siemens 828D ShopMill Control System , sau Fanuc Control,
magazin automat cu 24 scule, ghidaje protejate telescopic , suruburi precise cu bile si multe altele.
Chiar daca este un centru mic , robusteatea , rigiditatea si designul masinii din fonta mechanite cu
ghidaje largi si sanii placate cu Turcite otimizeaza utilizarea unui spatiu redus cu abundenta
performantelor tehnice ale centrului de prelucrare.
Optional :
axa a-4a , axul principal cu 12.000 rpm , racire prin scula sporesc
performatele tehnologice ale acestui cenntru
| Cursa axa X | 710 mm | X travel |
|---|---|---|
| Cursa axa Y | 450 mm | Y travel |
| Cursa axa Z | 500 mm | Z travel |
| Masa | 760 X430 mm | Table size |
| Distanta centru ax la coloana | 492 mm | Spindle centre to column |
| Distanta ax la masa | 110-620 mm | Spindle to table |
| Distanta de la coloana la masa | 305 – 735 mm | Column front to table centre |
| Avansuri rapide axele XYZ | 20 m / min Box Way | Rapid feed XYZ axis |
| Gama avansuri taiere | 1 – 20.000 mm/min | Cutting feed rates |
| Greutatea max admisa pe masa | 500 kg | Max table load |
| Canale T masa/randuri/pasul | 16 mm/4 x 100 mm | T size/slot number/patch |
| Turatii ax principal | 60 – 8.000 rpm | Spindle speed |
| Motor ax principal | 20 hp | Spindle motor |
| Conicitate ax principal | BT 40 | Spindle taper |
| Magazin de scule | 24 station arm type | Tool magazine capacity |
| Schimbarea sculei | 4 sec | Tool change time tool to tool |
| Diametrul max al culei | 80 mm | Max tool diameter |
| Greutatea max. a sculei | 7 Kg | Max tool weight |
| Capacitate de racire | 160 L | Coolant capacity |
| Surub cu bile(grade C3) | 32 mm P8 | Ball screw size (grade C3) |
| Marimea AC servo motor | 8 Nm Z 12 Nm | AC servo motor size |
| Greutatea masinii | 3600 Kg | Machine weight |
| Dimensiuni W x D x H | 2200 x 2120 x 2550 mm | Footprint W x D x H |
- STANDARD
- Siemens 828D ShopMill Control System
- Siemens Fanuc converter
- Monitor Color 10,4 inch TFT
- Magazin de scule cu 24 statii
- Sistem de racire
- Ungere automata
- RS 232 interface / USB / Flash card
- Orientarea axului principal programabila, airblast
- Interfata Ethernet
- Roata electronica pentru operarea externa a comenzii
- Echipat electronic pentru 4 axe (axa a 4-a optional)
- Rigid thread cutting
- Unitate spalare in zona masinii
- Lampa de lucru si carenaj complet
- OPTIONAL
- Siemens extra hard drive 30 MB
- Shop Mill off-line programming with CAD converter
- Renishaw laser
- Renishaw probe
- Transportor de aschii spiral /cu banda
- Axa a 4-a: hardware, drive card, motor, licenta, instalare
- Axa a 5-a continua CNC, necesita SINUMERIK 840D
- Racire prin scula
Siemens 828 Control ShopMill System
